E-mail
High Purity Material
High Purity Aluminium
Metal Spheres/Ball
Solid Spheres/Balls
Hollow Metal Spheres
Deep Drawing/Drawn
deep drawing/drawn
Metal Turning/Spinning
Metal Spinning/Spun
Aluminium Casting
aluminium casting process
aluminum casting material
aluminium die casting
Copper Casting
copper castings process
copper casting material
copper die casting
Steel Casting
steel casting process
stainless steel casting
special steel casting
Zinc Casting
Metal Stamping Parts

Permanent Mold Casting


Permanent mold (gravity die) casting, like die casting, is suited to high-volume production. Permanent mold castings typically are larger than die castings. Maximum weight of permanent mold castings usually is about 10 kg, but much larger castings sometimes are made when costs of tooling and casting equipment are justified by the quality required for the casting.
Permanent mold castings are gravity-fed and pouring rate is relatively low, but the metal mold produces rapid solidification. Permanent mold castings exhibit excellent mechanical properties. Castings are generally sound, provided that the alloys used exhibit good fluidity and resistance to hot tearing.
Mechanical properties of permanent mold castings can be further improved by heat treatment. If maximum properties are required, the heat treatment consists of a solution treatment at high temperature followed by a quench and then natural or artificial aging. For small castings in which the cooling rate in the mold is very rapid or for less critical parts, the solution treatment and quench may be eliminated and the fast cooling in the mold relied on to retain in solution the compounds that will produce age hardening.

For hot chamber process the pressure chamber is connected to the die cavity is immersed permanently in the molten metal. The inlet port of the pressurizing cylinder is uncovered as the plunger moves to the open (unpressurized) position. This allows a new charge of molten metal to fill the cavity and thus can fill the cavity faster than the cold chamber process. The hot chamber process is used for metals of low melting point and high fluidity such as tin, zinc, and lead that tend not to alloy easily with steel at their melt temperatures. Such as Zinc Die castings, Copper Die castings we offer.
  • Some common aluminium permanent mold casting alloys, and typical products cast from them, are presented below.

  • Alloy 366.0 - Automotive pistons

  • Alloys 355.0, C355.0, A357.0 - Timing gears, impellers, compressors, and aircraft and missile components requiring high strength

  • Alloys 356.0, A356.0 - Machine tool parts, aircraft wheels, pump parts, marine hardware, valve bodies, also can be heat-treated as T6, T651.

  • Other aluminium alloys commonly used for permanent mold castings include 296.0, 319.0, and 333.0.

  • Some Zinc Alloy castings, and copper alloy castings



Next

Customer-orientation, Professional Quality, Excellence pursue , one stop, full service manufacturer, supplier, exporter

Click here to get Quick Quote or Free Consultant

Email: marketing@junruidesign.com Tel:+0086 21 5982 0027 Fax: +0086 21 5982 0027 Cell phone: +0086 159 2126 3029
Copyright © 2012 JUN RUI INDUSTRIAL CO., LTD. All Rights Reserved. 沪公网安备 31011802001620号  
our show:Aluminum castings, Zinc castings, Copper castings, Steel castings, Iron castings
manufacturer technology: Die Casting, Gravity die casting, Investment Casting Sand Casting, Precision Machinig,CNC, Heattreating, Surface finish
Products show: Automotive Industry, Heatsink & gear housing, General Industry, stainless steel casting, Mining& earthmoving Industry, Pipe Valve & Energy Industry, Electrical & lighting Industry, Marine & Transportation Industry
Keywords:metal spun metal spinning deep drawn metal stamping